* initial cut of modernbert for transformers
* small bug fixes
* fixes
* Update import
* Use compiled mlp->mlp_norm to match research implementation
* Propagate changes in modular to modeling
* Replace duplicate attn_out_dropout in favor of attention_dropout
cc @warner-benjamin let me know if the two should remain separate!
* Update BOS to CLS and EOS to SEP
Please confirm @warner-benjamin
* Set default classifier bias to False, matching research repo
* Update tie_word_embeddings description
* Fix _init_weights for ForMaskedLM
* Match base_model_prefix
* Add compiled_head to match research repo outputs
* Fix imports for ModernBertForMaskedLM
* Just use "gelu" default outright for classifier
* Fix config name typo: initalizer -> initializer
* Remove some unused parameters in docstring. Still lots to edit there!
* Compile the embeddings forward
Not having this resulted in very slight differences - so small it wasn't even noticed for the base model, only for the large model.
But the tiny difference for large propagated at the embedding layer through the rest of the model, leading to notable differences of ~0.0084 average per value, up to 0.2343 for the worst case.
* Add drafts for ForSequenceClassification/ForTokenClassification
* Add initial SDPA support (not exactly equivalent to FA2 yet!)
During testing, FA2 and SDPA still differ by about 0.0098 per value in the token embeddings. It still predicts the correct mask fills, but I'd like to get it fully 1-1 if possible.
* Only use attention dropout if training
* Add initial eager attention support (also not equivalent to FA2 yet!)
Frustratingly, I also can't get eager to be equivalent to FA2 (or sdpa), but it does get really close, i.e. avg ~0.010 difference per value.
Especially if I use fp32 for both FA2&eager, avg ~0.0029 difference per value
The fill-mask results are good with eager.
* Add initial tests, output_attentions, output_hidden_states, prune_heads
Tests are based on BERT, not all tests pass yet: 23 failed, 79 passed, 100 skipped
* Remove kwargs from ModernBertForMaskedLM
Disable sparse_prediction by default to match the normal HF, can be enabled via config
* Remove/adjust/skip improper tests; warn if padding but no attn mask
* Run formatting etc.
* Run python utils/custom_init_isort.py
* FlexAttention with unpadded sequences(matches FA2 within bf16 numerics)
* Reformat init_weights based on review
* self -> module in attention forwards
* Remove if config.tie_word_embeddings
* Reformat output projection on a different line
* Remove pruning
* Remove assert
* Call contiguous() to simplify paths
* Remove prune_qkv_linear_layer
* Format code
* Keep as kwargs, only use if needed
* Remove unused codepaths & related config options
* Remove 3d attn_mask test; fix token classification tuple output
* Reorder: attention_mask above position_ids, fixes gradient checkpointing
* Fix usage if no FA2 or torch v2.5+
* Make torch.compile/triton optional
Should we rename 'compile'? It's a bit vague
* Separate pooling options into separate functions (cls, mean) - cls as default
* Simplify _pad_modernbert_output, remove unused labels path
* Update tied weights to remove decoder.weight, simplify decoder loading
* Adaptively set config.compile based on hf_device_map/device/resize, etc.
* Update ModernBertConfig docstring
* Satisfy some consistency checks, add unfinished docs
* Only set compile to False if there's more than 1 device
* Add docstrings for public ModernBert classes
* Dont replace docstring returns - ends up being duplicate
* Fix mistake in toctree
* Reformat toctree
* Patched FlexAttention, SDPA, Eager with Local Attention
* Implement FA2 -> SDPA -> Eager attn_impl defaulting, crucial
both to match the original performance, and to get the highest inference speed without requiring users to manually pick FA2
* Patch test edge case with Idefics3 not working with 'attn_implementation="sdpa"'
* Repad all_hidden_states as well
* rename config.compile to reference_compile
* disable flex_attention since it crashes
* Update modernbert.md
* Using dtype min to mask in eager
* Fully remove flex attention for now
It's only compatible with the nightly torch 2.6, so we'll leave it be for now. It's also slower than eager/sdpa.
Also, update compile -> reference_compile in one more case
* Call contiguous to allow for .view()
* Copyright 2020 -> 2024
Co-authored-by: Arthur <48595927+ArthurZucker@users.noreply.github.com>
* Update/simplify __init__ structure
Co-authored-by: Arthur <48595927+ArthurZucker@users.noreply.github.com>
* Remove "... if dropout_prob > 0 else identity"
As dropout with 0.0 should be efficient like identity
* re-use existing pad/unpad functions instead of creating new ones
* remove flexattention method
* Compute attention_mask and local_attention_mask once in modeling
* Simplify sequence classification prediction heads, only CLS now
Users can make custom heads if they feel like it
Also removes the unnecessary pool parameter
* Simplify module.training in eager attn
* Also export ModernBertPreTrainedModel
* Update the documentation with links to finetuning scripts
* Explain local_attention_mask parameter in docstring
* Simplify _autoset_attn_implementation, rely on super()
* Keep "in" to initialize Prediction head
Doublechecked with Benjamin that it's correct/what we used for pretraining
* add back mean pooling
* Use the pooling head in TokenClassification
* update copyright
* Reset config._attn_implementation_internal on failure
* Allow optional attention_mask in ForMaskedLM head
* fix failing run_slow tests
* Add links to the paper
* Remove unpad_no_grad, always pad/unpad without gradients
* local_attention_mask -> sliding_window_mask
* Revert "Use the pooling head in TokenClassification"
This reverts commit 99c38badd1.
There was no real motivation, no info on whether having this bigger head does anything useful.
* Simplify pooling, 2 options via if-else
---------
Co-authored-by: Tom Aarsen <37621491+tomaarsen@users.noreply.github.com>
Co-authored-by: Tom Aarsen <Cubiegamedev@gmail.com>
Co-authored-by: Said Taghadouini <taghadouinisaid@gmail.com>
Co-authored-by: Benjamin Clavié <ben@clavie.eu>
Co-authored-by: Antoine Chaffin <ant54600@hotmail.fr>
Co-authored-by: Arthur <48595927+ArthurZucker@users.noreply.github.com>
* docs: fix typo quickstart snippet in ColPali's model card
* docs: clean the ColPali's model card
* docs: make the `ColPaliForRetrieval`'s docstring more concise
* docs: add missing bash command used to convert weights for `vidore/colpali-v1.3-hf`
* initial commit for PR
Co-authored-by: Gabe Goodhart <gabe.l.hart@gmail.com>
* rename dynamic cache
Signed-off-by: Yu Chin Fabian Lim <flim@sg.ibm.com>
* add more unit tests
Signed-off-by: Yu Chin Fabian Lim <flim@sg.ibm.com>
* add integration test
Signed-off-by: Yu Chin Fabian Lim <flim@sg.ibm.com>
* add integration test
Signed-off-by: Yu Chin Fabian Lim <flim@sg.ibm.com>
* Add modular bamba file
* Remove trainer changes from unrelated PR
* Modify modular and cofig to get model running
* Fix some CI errors and beam search
* Fix a plethora of bugs from CI/docs/etc
* Add bamba to models with special caches
* Updat to newer mamba PR for mamba sublayer
* fix test_left_padding_compatibility
Signed-off-by: Yu Chin Fabian Lim <flim@sg.ibm.com>
* fix style
Signed-off-by: Yu Chin Fabian Lim <flim@sg.ibm.com>
* fix remaining tests
Signed-off-by: Yu Chin Fabian Lim <flim@sg.ibm.com>
* missed this test
Signed-off-by: Yu Chin Fabian Lim <flim@sg.ibm.com>
* ran make style
Signed-off-by: Yu Chin Fabian Lim <flim@sg.ibm.com>
* move slow tag to integration obj
Signed-off-by: Yu Chin Fabian Lim <flim@sg.ibm.com>
* make style
Signed-off-by: Yu Chin Fabian Lim <flim@sg.ibm.com>
* address comments
Signed-off-by: Yu Chin Fabian Lim <flim@sg.ibm.com>
* fix modular
Signed-off-by: Yu Chin Fabian Lim <flim@sg.ibm.com>
* left out one part of modular
Signed-off-by: Yu Chin Fabian Lim <flim@sg.ibm.com>
* change model
Signed-off-by: Yu Chin Fabian Lim <flim@sg.ibm.com>
* Make Rotary modular as well
* Update bamba.md
Added overview, update Model inference card and added config
* Update bamba.md
* Update bamba.md
* Update bamba.md
Minor fixes
* Add docs for config and model back
Signed-off-by: Antoni Viros i Martin <aviros@ibm.com>
* Add warning when using fast kernels
* replaced generate example
Signed-off-by: Yu Chin Fabian Lim <flim@sg.ibm.com>
* Address comments from PR
Signed-off-by: Antoni Viros i Martin <aviros@ibm.com>
* Propagate attention fixes
Signed-off-by: Antoni Viros i Martin <aviros@ibm.com>
* Fix attention interfaces to the new API
Signed-off-by: Antoni Viros i Martin <aviros@ibm.com>
* Fix API for decoder layer
Signed-off-by: Antoni Viros i Martin <aviros@ibm.com>
* Remove extra weights
Signed-off-by: Antoni Viros i Martin <aviros@ibm.com>
---------
Signed-off-by: Yu Chin Fabian Lim <flim@sg.ibm.com>
Signed-off-by: Antoni Viros i Martin <aviros@ibm.com>
Co-authored-by: Gabe Goodhart <gabe.l.hart@gmail.com>
Co-authored-by: Antoni Viros i Martin <aviros@ibm.com>
Co-authored-by: divya-kumari32 <72085811+divya-kumari32@users.noreply.github.com>
Co-authored-by: Antoni Viros <ani300@gmail.com>
* Add Cohere2 docs details
* Update docs/source/en/model_doc/cohere2.md
Co-authored-by: Steven Liu <59462357+stevhliu@users.noreply.github.com>
---------
Co-authored-by: Steven Liu <59462357+stevhliu@users.noreply.github.com>
* Add Falcon3 documentation
* Update Falcon3 documentation
* Change Falcon to Falcon3
* Update docs and run make fix-copies
* Add blog post and huggingface models links
* Add files
* Init
* Add TimmWrapperModel
* Fix up
* Some fixes
* Fix up
* Remove old file
* Sort out import orders
* Fix some model loading
* Compatible with pipeline and trainer
* Fix up
* Delete test_timm_model_1/config.json
* Remove accidentally commited files
* Delete src/transformers/models/modeling_timm_wrapper.py
* Remove empty imports; fix transformations applied
* Tidy up
* Add image classifcation model to special cases
* Create pretrained model; enable device_map='auto'
* Enable most tests; fix init order
* Sort imports
* [run-slow] timm_wrapper
* Pass num_classes into timm.create_model
* Remove train transforms from image processor
* Update timm creation with pretrained=False
* Fix gamma/beta issue for timm models
* Fixing gamma and beta renaming for timm models
* Simplify config and model creation
* Remove attn_implementation diff
* Fixup
* Docstrings
* Fix warning msg text according to test case
* Fix device_map auto
* Set dtype and device for pixel_values in forward
* Enable output hidden states
* Enable tests for hidden_states and model parallel
* Remove default scriptable arg
* Refactor inner model
* Update timm version
* Fix _find_mismatched_keys function
* Change inheritance for Classification model (fix weights loading with device_map)
* Minor bugfix
* Disable save pretrained for image processor
* Rename hook method for loaded keys correction
* Rename state dict keys on save, remove `timm_model` prefix, make checkpoint compatible with `timm`
* Managing num_labels <-> num_classes attributes
* Enable loading checkpoints in Trainer to resume training
* Update error message for output_hidden_states
* Add output hidden states test
* Decouple base and classification models
* Add more test cases
* Add save-load-to-timm test
* Fix test name
* Fixup
* Add do_pooling
* Add test for do_pooling
* Fix doc
* Add tests for TimmWrapperModel
* Add validation for `num_classes=0` in timm config + test for DINO checkpoint
* Adjust atol for test
* Fix docs
* dev-ci
* dev-ci
* Add tests for image processor
* Update docs
* Update init to new format
* Update docs in configuration
* Fix some docs in image processor
* Improve docs for modeling
* fix for is_timm_checkpoint
* Update code examples
* Fix header
* Fix typehint
* Increase tolerance a bit
* Fix Path
* Fixing model parallel tests
* Disable "parallel" tests
* Add comment for metadata
* Refactor AutoImageProcessor for timm wrapper loading
* Remove custom test_model_outputs_equivalence
* Add require_timm decorator
* Fix comment
* Make image processor work with older timm versions and tensor input
* Save config instead of whole model in image processor tests
* Add docstring for `image_processor_filename`
* Sanitize kwargs for timm image processor
* Fix doc style
* Update check for tensor input
* Update normalize
* Remove _load_timm_model function
---------
Co-authored-by: Amy Roberts <22614925+amyeroberts@users.noreply.github.com>
* add deformable detr image processor fast
* add fast processor to doc
* fix copies
* nit docstring
* Add tests gpu/cpu and fix docstrings
* fix docstring
* import changes from detr
* fix imports
* rebase and fix
* fix input data format change in detr and rtdetr fast
* Fix post process function called in the instance segmentation example of mask2former
* fix description and additional notes for post_process_instance_segmentation of maskformers
* remove white space in maskformers post_process_instance_segmentation doc
* change image.size[::-1] to height and width for clarity in segmentation examples
* Add model skeletion with transformers-cli add-new-model-like
* Convert config to modular, add rms_norm_eps, delete clip_qkv
* Convert model to modular, add RMSNorm
* Add flash attention with qk norm and no qkv clipping
* Add decoder layer with RMSNorm after attention/feedforward layers
* Add base and causal model
* Add converter improvements from OLMo repo
* Update weight loading in OLMo to HF converter
* Set correct default for rms_norm_eps
* Set correct pipeline_model_mapping in test
* Run make fixup
* Fix model type
* Re-run modular conversion
* Manually set config docs to fix build errors
* Convert olmo-1124 to olmo_1124 to fix flash attention docs errors
* Start updating tests
* Update tests
* Copy upstream test_eager_matches_sdpa_inference_1_bfloat16 changes to olmo_1124
* Rename input_layernorm and post_attention_layernorm to reflect their ops better
* Use correct tokenizer
* Remove test unsupported by GPT2 tokenizer
* Create GenerationConfig outside of from_pretrained call
* Use simpler init file structure
* Add explicit __all__ to support simplified init
* Make safetensor serialization the default
* Update OLMo November 2024 docs
* add fast image processor rtdetr
* add gpu/cpu test and fix docstring
* remove prints
* add to doc
* nit docstring
* avoid iterating over images/annotations several times
* change torch typing
* Add image processor fast documentation
* feat: Added int conversion and unwrapping
* test: added tests for post_process_keypoint_detection of SuperPointImageProcessor
* docs: changed docs to include post_process_keypoint_detection method and switched from opencv to matplotlib
* test: changed test to not depend on SuperPointModel forward
* test: added missing require_torch decorator
* docs: changed pyplot parameters for the keypoints to be more visible in the example
* tests: changed import torch location to make test_flax and test_tf
* Revert "tests: changed import torch location to make test_flax and test_tf"
This reverts commit 39b32a2f69.
* tests: fixed import
* chore: applied suggestions from code review
Co-authored-by: NielsRogge <48327001+NielsRogge@users.noreply.github.com>
* tests: fixed import
* tests: fixed import (bis)
* tests: fixed import (ter)
* feat: added choice of type for target_size and changed tests accordingly
* docs: updated code snippet to reflect the addition of target size type choice in post process method
* tests: fixed imports (...)
* tests: fixed imports (...)
* style: formatting file
* docs: fixed typo from image[0] to image.size[0]
* docs: added output image and fixed some tests
* Update docs/source/en/model_doc/superpoint.md
Co-authored-by: Pavel Iakubovskii <qubvel@gmail.com>
* fix: included SuperPointKeypointDescriptionOutput in TYPE_CHECKING if statement and changed tests results to reflect changes to SuperPoint from absolute keypoints coordinates to relative
* docs: changed SuperPoint's docs to print output instead of just accessing
* style: applied make style
* docs: added missing output type and precision in docstring of post_process_keypoint_detection
* perf: deleted loop to perform keypoint conversion in one statement
* fix: moved keypoint conversion at the end of model forward
* docs: changed SuperPointInterestPointDecoder to SuperPointKeypointDecoder class name and added relative (x, y) coordinates information to its method
* fix: changed type hint
* refactor: removed unnecessary brackets
* revert: SuperPointKeypointDecoder to SuperPointInterestPointDecoder
* Update docs/source/en/model_doc/superpoint.md
Co-authored-by: Pavel Iakubovskii <qubvel@gmail.com>
---------
Co-authored-by: Steven Bucaille <steven.bucaille@buawei.com>
Co-authored-by: NielsRogge <48327001+NielsRogge@users.noreply.github.com>
Co-authored-by: Pavel Iakubovskii <qubvel@gmail.com>
* add colorize_depth and matplotlib availability check
* add post_process_depth_estimation for zoedepth + tests
* add post_process_depth_estimation for DPT + tests
* add post_process_depth_estimation in DepthEstimationPipeline & special case for zoedepth
* run `make fixup`
* fix import related error on tests
* fix more import related errors on test
* forgot some `torch` calls in declerations
* remove `torch` call in zoedepth tests that caused error
* updated docs for depth estimation
* small fix for `colorize` input/output types
* remove `colorize_depth`, fix various names, remove matplotlib dependency
* fix formatting
* run fixup
* different images for test
* update examples in `forward` functions
* fixed broken links
* fix output types for docs
* possible format fix inside `<Tip>`
* Readability related updates
Co-authored-by: Pavel Iakubovskii <qubvel@gmail.com>
* Readability related update
* cleanup after merge
* refactor `post_process_depth_estimation` to return dict; simplify ZoeDepth's `post_process_depth_estimation`
* rewrite dict merging to support python 3.8
---------
Co-authored-by: Pavel Iakubovskii <qubvel@gmail.com>
* mistral qna start
* mixtral qna
* oops
* qwen2 qna
* qwen2moe qna
* add missing input embed methods
* add copied to all methods, can't directly from llama due to the prefix
* make top level copied from
* add sdpa to OPT
* chore: remove redundant whitespace in OPTDecoder class
* fixup
* bug fix
* add sdpa and attention generate test
* fixup
* Refactor OPTAttention forward method for improved readability and maintainability
* undo refactor for _shape and key,val states
* add OPT to doc, fixup didn't find it for some reason
* change order
* change default attn_implemntation in testing to eager
* [run-slow] opt
* change test_eager_matches_sdpa_generate to the one llama
* Update default attention implementation in testing common
* [run-slow] opt
* remove uneeded print
* [run-slow] opt
* refactor model testers to have attn_implementation="eager"
* [run-slow] opt
* convert test_eager_matches_sdpa_generate to opt-350M
* bug fix when creating mask for opt
* [run-slow] opt
* if layer head mask default to eager
* if head mask is not none fall to eager
* [run-slow] opt
* Update src/transformers/models/opt/modeling_opt.py
Co-authored-by: amyeroberts <22614925+amyeroberts@users.noreply.github.com>
* Clean up Unpack imports (#33631)
clean up Unpack imports
* Fix DPT /Dinov2 sdpa regression on main (#33660)
* fallback to eager if output attentions.
* fix copies
* handle dependency errors in check_imports (#33622)
* handle dependency errors in check_imports
* change log level to warning
* add back self.max_position_embeddings = config.max_position_embeddings (#33550)
* add back self.max_position_embeddings = config.max_position_embeddings
* fix-copies
* Fix Llava conversion for LlavaQwen2ForCausalLM with Clip vision tower (#33613)
fix llavaqwen2 model conversion
* Uniformize kwargs for Udop processor and update docs (#33628)
* Add optional kwargs and uniformize udop
* cleanup Unpack
* nit Udop
* Generation: deprecate `PreTrainedModel` inheriting from `GenerationMixin` (#33203)
* Enable BNB multi-backend support (#31098)
* enable cpu bnb path
* fix style
* fix code style
* fix 4 bit path
* Update src/transformers/utils/import_utils.py
Co-authored-by: Aarni Koskela <akx@iki.fi>
* add multi backend refactor tests
* fix style
* tweak 4bit quantizer + fix corresponding tests
* tweak 8bit quantizer + *try* fixing corresponding tests
* fix dequant bnb 8bit
* account for Intel CPU in variability of expected outputs
* enable cpu and xpu device map
* further tweaks to account for Intel CPU
* fix autocast to work with both cpu + cuda
* fix comments
* fix comments
* switch to testing_utils.torch_device
* allow for xpu in multi-gpu tests
* fix tests 4bit for CPU NF4
* fix bug with is_torch_xpu_available needing to be called as func
* avoid issue where test reports attr err due to other failure
* fix formatting
* fix typo from resolving of merge conflict
* polish based on last PR review
Co-authored-by: Marc Sun <57196510+SunMarc@users.noreply.github.com>
* fix CI
* Update src/transformers/integrations/integration_utils.py
Co-authored-by: Arthur <48595927+ArthurZucker@users.noreply.github.com>
* Update src/transformers/integrations/integration_utils.py
Co-authored-by: Arthur <48595927+ArthurZucker@users.noreply.github.com>
* fix error log
* fix error msg
* add \n in error log
* make quality
* rm bnb cuda restriction in doc
* cpu model don't need dispatch
* fix doc
* fix style
* check cuda avaliable in testing
* fix tests
* Update docs/source/en/model_doc/chameleon.md
Co-authored-by: Marc Sun <57196510+SunMarc@users.noreply.github.com>
* Update docs/source/en/model_doc/llava_next.md
Co-authored-by: Aarni Koskela <akx@iki.fi>
* Update tests/quantization/bnb/test_4bit.py
Co-authored-by: Aarni Koskela <akx@iki.fi>
* Update tests/quantization/bnb/test_4bit.py
Co-authored-by: Aarni Koskela <akx@iki.fi>
* fix doc
* fix check multibackends
* fix import sort
* remove check torch in bnb
* docs: update bitsandbytes references with multi-backend info
* docs: fix small mistakes in bnb paragraph
* run formatting
* reveret bnb check
* move bnb multi-backend check to import_utils
* Update src/transformers/utils/import_utils.py
Co-authored-by: Aarni Koskela <akx@iki.fi>
* fix bnb check
* minor fix for bnb
* check lib first
* fix code style
* Revert "run formatting"
This reverts commit ac108c6d6b.
* fix format
* give warning when bnb version is low and no cuda found]
* fix device assignment check to be multi-device capable
* address akx feedback on get_avlbl_dev fn
* revert partially, as we don't want the function that public, as docs would be too much (enforced)
---------
Co-authored-by: Aarni Koskela <akx@iki.fi>
Co-authored-by: Titus von Koeller <9048635+Titus-von-Koeller@users.noreply.github.com>
Co-authored-by: Marc Sun <57196510+SunMarc@users.noreply.github.com>
Co-authored-by: Arthur <48595927+ArthurZucker@users.noreply.github.com>
* Fix error string after refactoring into get_chat_template (#33652)
* Fix error string after refactoring into get_chat_template
* Take suggestion from CR
Co-authored-by: Matt <Rocketknight1@users.noreply.github.com>
---------
Co-authored-by: Matt <Rocketknight1@users.noreply.github.com>
* uniformize git processor (#33668)
* uniformize git processor
* update doctring
* Modular `transformers`: modularity and inheritance for new model additions (#33248)
* update exampel
* update
* push the converted diff files for testing and ci
* correct one example
* fix class attributes and docstring
* nits
* oups
* fixed config!
* update
* nitd
* class attributes are not matched against the other, this is missing
* fixed overwriting self.xxx now onto the attributes I think
* partial fix, now order with docstring
* fix docstring order?
* more fixes
* update
* fix missing docstrings!
* examples don't all work yet
* fixup
* nit
* updated
* hick
* update
* delete
* update
* update
* update
* fix
* all default
* no local import
* fix more diff
* some fix related to "safe imports"
* push fixed
* add helper!
* style
* add a check
* all by default
* add the
* update
* FINALLY!
* nit
* fix config dependencies
* man that is it
* fix fix
* update diffs
* fix the last issue
* re-default to all
* alll the fixes
* nice
* fix properties vs setter
* fixup
* updates
* update dependencies
* make sure to install what needs to be installed
* fixup
* quick fix for now
* fix!
* fixup
* update
* update
* updates
* whitespaces
* nit
* fix
* simplify everything, and make it file agnostic (should work for image processors)
* style
* finish fixing all import issues
* fixup
* empty modeling should not be written!
* Add logic to find who depends on what
* update
* cleanup
* update
* update gemma to support positions
* some small nits
* this is the correct docstring for gemma2
* fix merging of docstrings
* update
* fixup
* update
* take doc into account
* styling
* update
* fix hidden activation
* more fixes
* final fixes!
* fixup
* fixup instruct blip video
* update
* fix bugs
* align gemma2 with the rest as well
* updats
* revert
* update
* more reversiom
* grind
* more
* arf
* update
* order will matter
* finish del stuff
* update
* rename to modular
* fixup
* nits
* update makefile
* fixup
* update order of the checks!
* fix
* fix docstring that has a call inside
* fiix conversion check
* style
* add some initial documentation
* update
* update doc
* some fixup
* updates
* yups
* Mostly todo gimme a minut
* update
* fixup
* revert some stuff
* Review docs for the modular transformers (#33472)
Docs
* good update
* fixup
* mmm current updates lead to this code
* okay, this fixes it
* cool
* fixes
* update
* nit
* updates
* nits
* fix doc
* update
* revert bad changes
* update
* updates
* proper update
* update
* update?
* up
* update
* cool
* nits
* nits
* bon bon
* fix
* ?
* minimise changes
* update
* update
* update
* updates?
* fixed gemma2
* kind of a hack
* nits
* update
* remove `diffs` in favor of `modular`
* fix make fix copies
---------
Co-authored-by: Lysandre Debut <hi@lysand.re>
* Fix CIs post merging modular transformers (#33681)
update
* Fixed docstring for cohere model regarding unavailability of prune_he… (#33253)
* Fixed docstring for cohere model regarding unavailability of prune_head() methods
The docstring mentions that cohere model supports prune_heads() methods. I have fixed the docstring by explicitly mentioning that it doesn't support that functionality.
* Update src/transformers/models/cohere/modeling_cohere.py
---------
Co-authored-by: Lysandre Debut <hi@lysand.re>
* Generation tests: update imagegpt input name, remove unused functions (#33663)
* Improve Error Messaging for Flash Attention 2 on CPU (#33655)
Update flash-attn error message on CPU
Rebased to latest branch
* Gemma2: fix config initialization (`cache_implementation`) (#33684)
* Fix ByteLevel alphabet missing when Sequence pretokenizer is used (#33556)
* Fix ByteLevel alphabet missing when Sequence pretokenizer is used
* Fixed formatting with `ruff`.
* Uniformize kwargs for image-text-to-text processors (#32544)
* uniformize FUYU processor kwargs
* Uniformize instructblip processor kwargs
* Fix processor kwargs and tests Fuyu, InstructBlip, Kosmos2
* Uniformize llava_next processor
* Fix save_load test for processor with chat_template only as extra init args
* Fix import Unpack
* Fix Fuyu Processor import
* Fix FuyuProcessor import
* Fix FuyuProcessor
* Add defaults for specific kwargs kosmos2
* Fix Udop to return BatchFeature instead of BatchEncoding and uniformize kwargs
* Add tests processor Udop
* remove Copied from in processing Udop as change of input orders caused by BatchEncoding -> BatchFeature
* Fix overwrite tests kwargs processors
* Add warnings and BC for changes in processor inputs order, change docs, add BC for text_pair as arg for Udop
* Fix processing test fuyu
* remove unnecessary pad_token check in instructblip ProcessorTest
* Fix BC tests and cleanup
* FIx imports fuyu
* Uniformize Pix2Struct
* Fix wrong name for FuyuProcessorKwargs
* Fix slow tests reversed inputs align fuyu llava-next, change udop warning
* Fix wrong logging import udop
* Add check images text input order
* Fix copies
* change text pair handling when positional arg
* rebase on main, fix imports in test_processing_common
* remove optional args and udop uniformization from this PR
* fix failing tests
* remove unnecessary test, fix processing utils and test processing common
* cleanup Unpack
* cleanup
* fix conflict grounding dino
* 🚨🚨 Setting default behavior of assisted decoding (#33657)
* tests: fix pytorch tensor placement errors (#33485)
This commit fixes the following errors:
* Fix "expected all tensors to be on the same device" error
* Fix "can't convert device type tensor to numpy"
According to pytorch documentation torch.Tensor.numpy(force=False)
performs conversion only if tensor is on CPU (plus few other restrictions)
which is not the case. For our case we need force=True since we just
need a data and don't care about tensors coherency.
Fixes: #33517
See: https://pytorch.org/docs/2.4/generated/torch.Tensor.numpy.html
Signed-off-by: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
* bump tokenizers, fix added tokens fast (#32535)
* update based on tokenizers release
* update
* nits
* update
* revert re addition
* don't break that yet
* fmt
* revert unwanted
* update tokenizers version
* update dep table
* update
* update in conversion script as well
* some fix
* revert
* fully revert
* fix training
* remove set trace
* fixup
* update
* update
* [Pixtral] Improve docs, rename model (#33491)
* Improve docs, rename model
* Fix style
* Update repo id
* fix code quality after merge
* HFQuantizer implementation for compressed-tensors library (#31704)
* Add compressed-tensors HFQuantizer implementation
* flag serializable as False
* run
* revive lines deleted by ruff
* fixes to load+save from sparseml, edit config to quantization_config, and load back
* address satrat comment
* compressed_tensors to compressed-tensors and revert back is_serializable
* rename quant_method from sparseml to compressed-tensors
* tests
* edit tests
* clean up tests
* make style
* cleanup
* cleanup
* add test skip for when compressed tensors is not installed
* remove pydantic import + style
* delay torch import in test
* initial docs
* update main init for compressed tensors config
* make fix-copies
* docstring
* remove fill_docstring
* Apply suggestions from code review
Co-authored-by: Marc Sun <57196510+SunMarc@users.noreply.github.com>
* review comments
* review comments
* comments - suppress warnings on state dict load, tests, fixes
* bug-fix - remove unnecessary call to apply quant lifecycle
* run_compressed compatability
* revert changes not needed for compression
* no longer need unexpected keys fn
* unexpected keys not needed either
* Apply suggestions from code review
Co-authored-by: Marc Sun <57196510+SunMarc@users.noreply.github.com>
* add to_diff_dict
* update docs and expand testing
* Update _toctree.yml with compressed-tensors
* Update src/transformers/utils/quantization_config.py
Co-authored-by: Arthur <48595927+ArthurZucker@users.noreply.github.com>
* update doc
* add note about saving a loaded model
---------
Co-authored-by: George Ohashi <george@neuralmagic.com>
Co-authored-by: Marc Sun <57196510+SunMarc@users.noreply.github.com>
Co-authored-by: Sara Adkins <sara@neuralmagic.com>
Co-authored-by: Sara Adkins <sara.adkins65@gmail.com>
Co-authored-by: Arthur <48595927+ArthurZucker@users.noreply.github.com>
Co-authored-by: Dipika Sikka <ds3822@columbia.edu>
Co-authored-by: Dipika <dipikasikka1@gmail.com>
* update model card for opt
* add batch size to inference table
* [slow-run] opt
* [run-slow] opt
---------
Signed-off-by: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Co-authored-by: Avishai Elmakies <avishai.elma@cs.huji.ac.il>
Co-authored-by: amyeroberts <22614925+amyeroberts@users.noreply.github.com>
Co-authored-by: Pablo Montalvo <39954772+molbap@users.noreply.github.com>
Co-authored-by: chengchengpei <5881383+chengchengpei@users.noreply.github.com>
Co-authored-by: Isotr0py <2037008807@qq.com>
Co-authored-by: Yoni Gozlan <74535834+yonigozlan@users.noreply.github.com>
Co-authored-by: Joao Gante <joaofranciscocardosogante@gmail.com>
Co-authored-by: jiqing-feng <jiqing.feng@intel.com>
Co-authored-by: Aarni Koskela <akx@iki.fi>
Co-authored-by: Titus von Koeller <9048635+Titus-von-Koeller@users.noreply.github.com>
Co-authored-by: Marc Sun <57196510+SunMarc@users.noreply.github.com>
Co-authored-by: Arthur <48595927+ArthurZucker@users.noreply.github.com>
Co-authored-by: Tibor Reiss <75096465+tibor-reiss@users.noreply.github.com>
Co-authored-by: Matt <Rocketknight1@users.noreply.github.com>
Co-authored-by: Lysandre Debut <hi@lysand.re>
Co-authored-by: Muhammad Naufil <m.naufil1@gmail.com>
Co-authored-by: sizhky <yyeshr@gmail.com>
Co-authored-by: Umar Butler <umar@umar.au>
Co-authored-by: Jonathan Mamou <jonathan.mamou@intel.com>
Co-authored-by: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Co-authored-by: NielsRogge <48327001+NielsRogge@users.noreply.github.com>
Co-authored-by: Arthur Zucker <arthur.zucker@gmail.com>
Co-authored-by: Benjamin Fineran <bfineran@users.noreply.github.com>
Co-authored-by: George Ohashi <george@neuralmagic.com>
Co-authored-by: Sara Adkins <sara@neuralmagic.com>
Co-authored-by: Sara Adkins <sara.adkins65@gmail.com>
Co-authored-by: Dipika Sikka <ds3822@columbia.edu>
Co-authored-by: Dipika <dipikasikka1@gmail.com>
* Add Auto model for image-text-to-text
* Remove donut from processing auto, add chameleon ti image text to text models
* add qwen2_vl and llava_onevision
* add pixtral to auto model for image-text-to-text
* add mllama and idefics3
* remove models in IGNORE_NON_AUTO_CONFIGURED
* add AutoModelForImageTextToText to tests and doc
* docs: add example for separating q, k, v projections in SAM
* docs: How to Hack Any Transformers Model
* docs: remove changes from sam model docs
* Apply suggestions from code review
Co-authored-by: Arthur <48595927+ArthurZucker@users.noreply.github.com>
---------
Co-authored-by: Arthur <48595927+ArthurZucker@users.noreply.github.com>
* Initial commit for MyT5 model
* custom implementation of MyT5 tokenizer, unused files deleted
* unittest for myt5 tokenizer
* upadate of import structure and style
* removed remmanents of MyT5Config
* fixed docstrings
* Updates after review: filled documentaion file, new docstrings and tests added
* Fixed code style issues
* fixed copied from to refer to function
* updated loading myt5 tokenizer in tests, added sample byte map file to fixtures
* changes after review
* removed redundant copied from
* removed redundant copied from
* optimalization and loading model from hf
* [run_slow] myt5
* [run-slow] myt5
* Updated en documentation for myt5
Co-authored-by: Arthur <48595927+ArthurZucker@users.noreply.github.com>
---------
Co-authored-by: Arthur <48595927+ArthurZucker@users.noreply.github.com>
* onboard phimoe model
* removed debug code
* added unit tests
* updated docs
* formatted
* fixed unit tests
* fixed test case
* fixed format
* refactored code
* fixed expected outputs in the integration tests
* Added a warning msg
* Addressed comments
* Addressed comments
* fixed test cases
* added paper link
* Addressed comments
* Refactored PhimoeForCausalLM forward fn
* Refactored PhimoeRotaryEmbedding class
* fixed test cases
* fixed testcase
* fixed test case
* Addressed comments
* fixed test cases
* fixed testcases
* Used cache position instead to get the seq len
* Trainer - deprecate tokenizer for processing_class
* Extend chage across Seq2Seq trainer and docs
* Add tests
* Update to FutureWarning and add deprecation version
Update siglip.md
This was already partially fixed relative to the deployed docs. But the partial fix made it inconsistent. Additionally, giving the full text ("This is a photo of...") is likely not the desired output.
* Add Idefics 3!
* fixes to make both pipelines identical
* fix for quantized models
* First pass at the review
* remove vocab size from the main config (it's still in the text_config)
* hot fix for merve
* Apply suggestions from code review
Co-authored-by: amyeroberts <22614925+amyeroberts@users.noreply.github.com>
* re-add model_type for text_config
* remove support for old_cache
* remove hidden_size from main config
* rename idefics3 HF repo
* few changes suggested in the PR
* fix to input_data_format computation
* remove overwrite of _autoset_attn_implementation following @zucchini-nlp suggestion
* improve example
* few improvements from amy's review
* big change to enable processing input images as numpy arrays
* Changes to the code to uniformize processor kwargs
* image processing tests
* image processing tests fixes and some bugs they discovered
* addressed review comments from Yoni
* fix modeling tests
* remove special tokens that are not special
* fixes tests
* skip failing tests - they also fail for idefics2
* added paper and readded the tests with multi gpu, who knows
* Update docs/source/en/model_doc/idefics3.md
Co-authored-by: amyeroberts <22614925+amyeroberts@users.noreply.github.com>
* Apply suggestions from code review
Co-authored-by: amyeroberts <22614925+amyeroberts@users.noreply.github.com>
* review amy until image_processing_idefics3
* last comments from Amy
* review amy
* Update src/transformers/models/idefics3/image_processing_idefics3.py
Co-authored-by: amyeroberts <22614925+amyeroberts@users.noreply.github.com>
* Update src/transformers/models/idefics3/modeling_idefics3.py
Co-authored-by: amyeroberts <22614925+amyeroberts@users.noreply.github.com>
* Update docs/source/en/model_doc/idefics3.md
Co-authored-by: amyeroberts <22614925+amyeroberts@users.noreply.github.com>
* doc improvement - amy review
* fix runtime error during fine-tuning
* amy's review
* Update src/transformers/models/idefics3/image_processing_idefics3.py
Co-authored-by: amyeroberts <22614925+amyeroberts@users.noreply.github.com>
* Update src/transformers/models/idefics3/image_processing_idefics3.py
Co-authored-by: amyeroberts <22614925+amyeroberts@users.noreply.github.com>
* Update src/transformers/models/idefics3/modeling_idefics3.py
Co-authored-by: amyeroberts <22614925+amyeroberts@users.noreply.github.com>
* ruff
* amy's comment on the order
* ruff ruff
* fix copies
* square images when they are not splitted
* ruff :(
* Update src/transformers/models/idefics3/image_processing_idefics3.py
Co-authored-by: amyeroberts <22614925+amyeroberts@users.noreply.github.com>
* Update tests/models/idefics3/test_processing_idefics3.py
Co-authored-by: amyeroberts <22614925+amyeroberts@users.noreply.github.com>
* fix small bug introduced in refactor
* amy's image processing changes
* fixes peft tests and ruff
* modify to_pil_image from transformers. and review from emanuele.
* add modified to_pil_image
---------
Co-authored-by: amyeroberts <22614925+amyeroberts@users.noreply.github.com>
