add docs

docs/source/en/model_doc/blip-2.md

@@ -40,6 +40,10 @@ The original code can be found [here](https://github.com/salesforce/LAVIS/tree/5
 - BLIP-2 can be used for conditional text generation given an image and an optional text prompt. At inference time, it's recommended to use the [`generate`] method.
 - One can use [`Blip2Processor`] to prepare images for the model, and decode the predicted tokens ID's back to text.
 
+> [!NOTE]
+> BLIP models after release v4.46 will raise warnings about adding `processor.num_query_tokens = {{num_query_tokens}}` and expand model embeddings layer to add special `<image>` token. It is strongly recommended to add the attributes to the processor if you own the model checkpoint, or open a PR if it is not owned by you. Adding these attributes means that BLIP will add the number of query tokens required per image and expand the text with as many `<image>` placeholders as there will be query tokens. Usually it is around 500 tokens per image, so make sure that the text is not truncated as otherwise there wil be failure when merging the embeddings.
+The attributes can be obtained from model config, as `model.config.num_query_tokens` and model embeddings expansion can be done by following [this link](https://gist.github.com/zucchini-nlp/e9f20b054fa322f84ac9311d9ab67042). 
+
 ## Resources
 
 A list of official Hugging Face and community (indicated by 🌎) resources to help you get started with BLIP-2.

docs/source/en/model_doc/instructblip.md

@@ -33,6 +33,10 @@ The original code can be found [here](https://github.com/salesforce/LAVIS/tree/m
 
 InstructBLIP uses the same architecture as [BLIP-2](blip2) with a tiny but important difference: it also feeds the text prompt (instruction) to the Q-Former.
 
+> [!NOTE]
+> BLIP models after release v4.46 will raise warnings about adding `processor.num_query_tokens = {{num_query_tokens}}` and expand model embeddings layer to add special `<image>` token. It is strongly recommended to add the attributes to the processor if you own the model checkpoint, or open a PR if it is not owned by you. Adding these attributes means that BLIP will add the number of query tokens required per image and expand the text with as many `<image>` placeholders as there will be query tokens. Usually it is around 500 tokens per image, so make sure that the text is not truncated as otherwise there wil be failure when merging the embeddings.
+The attributes can be obtained from model config, as `model.config.num_query_tokens` and model embeddings expansion can be done by following [this link](https://gist.github.com/zucchini-nlp/e9f20b054fa322f84ac9311d9ab67042). 
+
 ## InstructBlipConfig
 
 [[autodoc]] InstructBlipConfig

docs/source/en/model_doc/instructblipvideo.md

@@ -35,6 +35,10 @@ The original code can be found [here](https://github.com/salesforce/LAVIS/tree/m
 
 - The model was trained by sampling 4 frames per video, so it's recommended to sample 4 frames
 
+> [!NOTE]
+> BLIP models after release v4.46 will raise warnings about adding `processor.num_query_tokens = {{num_query_tokens}}` and expand model embeddings layer to add special `<image>` token. It is strongly recommended to add the attributes to the processor if you own the model checkpoint, or open a PR if it is not owned by you. Adding these attributes means that BLIP will add the number of query tokens required per image and expand the text with as many `<image>` placeholders as there will be query tokens. Usually it is around 500 tokens per image, so make sure that the text is not truncated as otherwise there wil be failure when merging the embeddings.
+The attributes can be obtained from model config, as `model.config.num_query_tokens` and model embeddings expansion can be done by following [this link](https://gist.github.com/zucchini-nlp/e9f20b054fa322f84ac9311d9ab67042). 
+
 ## InstructBlipVideoConfig
 
 [[autodoc]] InstructBlipVideoConfig

docs/source/en/model_doc/llava.md

@@ -40,6 +40,12 @@ The original code can be found [here](https://github.com/haotian-liu/LLaVA/tree/
 
 - Note the model has not been explicitly trained to process multiple images in the same prompt, although this is technically possible, you may experience inaccurate results.
 
+> [!NOTE]
+> LLaVA models after release v4.46 will raise warnings about adding `processor.patch_size = {{patch_size}}`, `processor.num_additional_image_tokens = {{num_additional_image_tokens}}` and processor.vision_feature_select_strategy = {{vision_feature_select_strategy}}`. It is strongly recommended to add the attributes to the processor if you own the model checkpoint, or open a PR if it is not owned by you.
+Adding these attributes means that LLaVA will try to infer the number of image tokens required per image and expand the text with as many `<image>` placeholders as there will be tokens. Usually it is around 500 tokens per image, so make sure that the text is not truncated as otherwise there will be failure when merging the embeddings.
+The attributes can be obtained from model config, as `model.config.vision_config.patch_size` or `model.config.vision_feature_select_strategy`. The `num_additional_image_tokens` should be `1` if the vision backbone adds a CLS token or `0` if nothing extra is added to the vision patches.
+
+
 ### Single image inference
 
 For best results, we recommend users to use the processor's `apply_chat_template()` method to format your prompt correctly. For that you need to construct a conversation history, passing in a plain string will not format your prompt. Each message in the conversation history for chat templates is a dictionary with keys "role" and "content". The "content" should be a list of dictionaries, for "text" and "image" modalities, as follows:

docs/source/en/model_doc/llava_next.md

@@ -119,6 +119,11 @@ print(text_prompt)
 "<|im_start|>system\nYou are a helpful assistant.<|im_end|>\n<|im_start|>user\n<image>\nWhat is shown in this image?<|im_end|>\n<|im_start|>assistant\n"
 ```
 
+> [!NOTE]
+> LLaVA models after release v4.46 will raise warnings about adding `processor.patch_size = {{patch_size}}`, `processor.num_additional_image_tokens = {{num_additional_image_tokens}}` and processor.vision_feature_select_strategy = {{vision_feature_select_strategy}}`. It is strongly recommended to add the attributes to the processor if you own the model checkpoint, or open a PR if it is not owned by you.
+Adding these attributes means that LLaVA will try to infer the number of image tokens required per image and expand the text with as many `<image>` placeholders as there will be tokens. Usually it is around 500 tokens per image, so make sure that the text is not truncated as otherwise there will be failure when merging the embeddings.
+The attributes can be obtained from model config, as `model.config.vision_config.patch_size` or `model.config.vision_feature_select_strategy`. The `num_additional_image_tokens` should be `1` if the vision backbone adds a CLS token or `0` if nothing extra is added to the vision patches.
+
 ## Usage example
 
 ### Single image inference

docs/source/en/model_doc/llava_next_video.md

@@ -92,6 +92,11 @@ text_prompt = processor.apply_chat_template(conversation, add_generation_prompt=
 # Note that the template simply formats your prompt, you still have to tokenize it and obtain pixel values for your visuals
 print(text_prompt)
 ```
+> [!NOTE]
+> LLaVA models after release v4.46 will raise warnings about adding `processor.patch_size = {{patch_size}}`, `processor.num_additional_image_tokens = {{num_additional_image_tokens}}` and processor.vision_feature_select_strategy = {{vision_feature_select_strategy}}`. It is strongly recommended to add the attributes to the processor if you own the model checkpoint, or open a PR if it is not owned by you.
+Adding these attributes means that LLaVA will try to infer the number of image tokens required per image and expand the text with as many `<image>` placeholders as there will be tokens. Usually it is around 500 tokens per image, so make sure that the text is not truncated as otherwise there will be failure when merging the embeddings.
+The attributes can be obtained from model config, as `model.config.vision_config.patch_size` or `model.config.vision_feature_select_strategy`. The `num_additional_image_tokens` should be `1` if the vision backbone adds a CLS token or `0` if nothing extra is added to the vision patches.
+
 
 ## Usage example
 

docs/source/en/model_doc/video_llava.md

@@ -53,6 +53,11 @@ for the LLM*
 This model was contributed by [RaushanTurganbay](https://huggingface.co/RaushanTurganbay).
 The original code can be found [here](https://github.com/PKU-YuanGroup/Video-LLaVA).
 
+> [!NOTE]
+> LLaVA models after release v4.46 will raise warnings about adding `processor.patch_size = {{patch_size}}`, `processor.num_additional_image_tokens = {{num_additional_image_tokens}}` and processor.vision_feature_select_strategy = {{vision_feature_select_strategy}}`. It is strongly recommended to add the attributes to the processor if you own the model checkpoint, or open a PR if it is not owned by you.
+Adding these attributes means that LLaVA will try to infer the number of image tokens required per image and expand the text with as many `<image>` placeholders as there will be tokens. Usually it is around 500 tokens per image, so make sure that the text is not truncated as otherwise there will be failure when merging the embeddings.
+The attributes can be obtained from model config, as `model.config.vision_config.patch_size` or `model.config.vision_feature_select_strategy`. The `num_additional_image_tokens` should be `1` if the vision backbone adds a CLS token or `0` if nothing extra is added to the vision patches.
+
 
 ## Usage example
 

docs/source/en/model_doc/vipllava.md

@@ -84,6 +84,11 @@ For multiple turns conversation:
 A chat between a curious human and an artificial intelligence assistant. The assistant gives helpful, detailed, and polite answers to the human's questions.###Human: <image>\n<prompt1>###Assistant: <answer1>###Human: <prompt2>###Assistant:
 ```
 
+> [!NOTE]
+> LLaVA models after release v4.46 will raise warnings about adding `processor.patch_size = {{patch_size}}`, `processor.num_additional_image_tokens = {{num_additional_image_tokens}}` and processor.vision_feature_select_strategy = {{vision_feature_select_strategy}}`. It is strongly recommended to add the attributes to the processor if you own the model checkpoint, or open a PR if it is not owned by you.
+Adding these attributes means that LLaVA will try to infer the number of image tokens required per image and expand the text with as many `<image>` placeholders as there will be tokens. Usually it is around 500 tokens per image, so make sure that the text is not truncated as otherwise there will be failure when merging the embeddings.
+The attributes can be obtained from model config, as `model.config.vision_config.patch_size` or `model.config.vision_feature_select_strategy`. The `num_additional_image_tokens` should be `1` if the vision backbone adds a CLS token or `0` if nothing extra is added to the vision patches.
+
 
 ## VipLlavaConfig